West Coast Equipment’s Pre-Owned Machinery

Used & Refurbished equipment from West Coast Equipment represents and exceptional value. Have confidence and buy from an authorized dealer rather than take your chances with classified or online ads. 

We are an authorized dealer for all the major brands and therefore have an intimate knowledge of the machines we buy.

Refurbished Equipment 

  • Is reconditioned to a like new appearance including factory paint when possible
  • Fully inspected by our in-house master technicians
  • Worn grips, deteriorating handles are repalced
  • Annual inspections are up to date
  • Comes with 30 day warranty

 Used Equipment

  • Each unit is fully inspected by our in-house master technicians
  • Necessary repairs and maintenance are done
  • Every used machine is covered by a 30 day warranty

If you ever have questions about a used or refurbished machine you purchase from us, you can be assured that we’ll have the answers for you because we have been the experts to call for 36 years.

Right now we have two freshly refurbished Genie Scissor Lifts. Check them out:

 

Genie Scissor Lift 2

Genie Scissor Lift 3

Genie Scissor Lift 2

This unit has been:

-Refurbished to a like new appearance
-Freshly painted using factory Genie Blue
-New sticker kit and deck grip tape installed
-Fully inspected by our in-house master technicians
-Annual inspection are up to date
-Comes with 30 day warranty

Year: 2015
Make: Genie
Model: GS-1930
Maximum Height: 19′
Hours: 108
Serial Number: GS3015A-142668

$8000.00 USD

Click here to learn more about used and refurbished machines.

 

Refurbished Genie Scissor Lift Genie Scissor Lift 2015 Genie GS-1930

Spec Sheet Genie-GS1930

Genie Scissor Lift 3

This unit has been:

-Refurbished to a like new appearance
-Freshly painted using factory Genie Blue
-New sticker kit and deck grip tape installed
-Fully inspected by our in-house master technicians
-Annual inspection are up to date
-Comes with 30 day warranty

Year: 2015
Make: Genie
Model: GS-1930
Maximum Height: 19′
Hours: 141
Serial Number: GS3015A-143411

$8000.00 USD

Click here to learn more about used and refurbished machines.

2015 Genie GS-1930 Serial Number: GS3015A-143411 2015 Genie Scissor lift

Spec Sheet Genie-GS1930

Genie Scissor Lift 1 Refurbished

This unit has been:

-Refurbished to a like new appearance
-Freshly painted using factory Genie Blue
-New sticker kit and deck grip tape installed
-Fully inspected by our in-house master technicians
-Annual inspection are up to date
-Comes with 30 day warranty

Year: 2015
Make: Genie
Model: GS-1930
Maximum Height: 19′
Hours: 56
Serial Number: GS3015A-139432

$8000.00 USD

Click here to learn more about used and refurbished machines.

Genie Scissor Lift 2015 Genie Scissor Lift Serial Number: GS3015A-139432 2015 Genie GS-1930

Spec Sheet Genie-GS1930

 

Reach Forklift recondition

One of West Coast Equipment’s recent sales was to do a recondition reach forklift project and get it back to proper working condition and appearance. Our client was ready to make their first purchase of a Gradall reach forklift for their roofing business.  They chose to go with a pre-owned Gradall 544D model that West Coast Equipment had in stock and available for sale.  With its 55 foot of reach and 10,000 pound capacity the Gradall 544D was the perfect choice for their application. This Gradall had recently been re-powered by West Coast Equipment with a Tier 3 Perkins engine along with most of the hydraulic system hoses being replaced, it was a perfect machine for the project. It was then decided that a fresh paint job with new decals and company logo were in order for the appearance our customer wanted to present out on the job site. Along with the paint job West Coast Installed new 1400 x 24 Solideal E3 Rock Lug tires for proven long life use on the job. Equipped with a 100 degree swing carriage and work light kit this Gradall turned out great and looks as good as it did when it was new.

Ready to work , this recently reconditioned Gradall 544D reach forklift looks great.

Ready to work , this recently reconditioned Gradall 544D reach forklift looks great.

Before the recondition process West Coast Equipment re-powered this Gradall with a new Tier 3 Perkins engine to help meet SCAQMD off-road compliance.

Tier 3 repower

SCAQMD compliant Tier 3 repower.

The beginning of the recondition process started out with a 1999 Gradall 544 D.  This machine was a trade in and a perfect candidate to restore it back to good as new, work ready condition.

Trade in reach fork.

1999 Gradall 544D reach forklift trade in.

To get this machine ready to go back to work it first it made a trip through the West Coast Equipment shop for a 115 point inspection to check all mechanical functions and safety related issues.  Service manager John Robidoux and his team in the service department provided their expertise in making sure this machine was ready to go.

inshop service After the West Coast Equipment shop crew did their pre paint services, the Gradall was then ready to head out to New Image paint in Orange California .  Tommy and his staff of painters prepare the Gradall for paint by taking the paint back down to the steel and get a good primer base coat on and ready for the factory JLG paint. Its Gradall blue again but nice and shiny !  Back to West Coast Equipment for the final touches before delivery, new factory decals, new seat and belt, load charts and a fresh set of treads.  Custom boom decals by ZLT MXID and this Gradall is ready to work.

New Image did a great job on the paint.

New Image did a great job on the paint.

The newly reconditioned reach forklift by West Coast Equipment is ready for delivery to our roofing customer.  For more information about this process contact the West Coast Equipment service department and ask for John.  Scissor lift , boom lift and  reach forklift reconditioning is one of our specialities.

The reconditioned reach forklift

The reconditioned reach forklift

 

 

FOR SALE 2006 GRADALL G6-42P

West Coast Equipment LLC is offering this 2006 GRADALL G 6 – 42P  for sale. Rated Capacity at 24 in.  Load center, 6.600 lb Maximum Lift Height 42 ft. With rear pivot steer, a powerful John Deere side mounted engine, and a roomy cab with wrap-around cab, the GRADALL model G6-42P will greatly boost productivity in any relative situation. Call West Coast Equipment for further questions regarding this machine or stop by to see it in person. Our sales representative will be glad to assist you with any questions. Call Tony Cerone @ 714-719-6444

 

THIS UNIT IS SOLD, BUT FOR OTHERS LIKE THIS ONE PLEASE CONTACT TONY FOR MORE INFORMATION AT 714-719-6444.

 

G6-42P_SS_D9b